Tengo XP, Instalo Windows 7 u 8 (x86 o x64) y se traba

Cerrado
Denunciar
Message postés
1
Date d'inscription
domingo, 12 de mayo de 2013
Estatus
Miembro
Última intervención
domingo, 12 de mayo de 2013
-
Tengo XP, Instalo Windows 7 u 8 x86 o x64 y se traba en el primer reinicio
(indistintamente en cualquiera de las versiones o bits)

RAM 8 Gb
Disco 1 - 320 Gb SATA
Disco 2 - 320 Gb SATA

Transcribo el DxDiag respecto del procesador, mi equipo y la placa de vídeo

Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp.080413-2111)
Language: Spanish (Regional Setting: Spanish)
System Manufacturer: Dell Inc.
System Model: OptiPlex GX620
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A11
Processor: Intel(R) Celeron(R) CPU 2.53GHz
Card name: RADEON X600/X550 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x3E50)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_3E50&SUBSYS_2083148C&REV_00
Display Memory: 256.0 MB
Current Mode: 1280 x 960 (32 bit) (60Hz)
Monitor: SyncMaster P2350N
Monitor Max Res: 1920,1080

Adjunto datos del Coreinfo, donde dice que el procesador acepta SO de 64 bits (pero tampoco me deja intalar los de 32 bits)

C:\>coreinfo

Coreinfo v3.2 - Dump information on system CPU and memory topology
Copyright (C) 2008-2012 Mark Russinovich
Sysinternals - www.sysinternals.com

Intel(R) Celeron(R) CPU 2.53GHz
x86 Family 15 Model 4 Stepping 1, GenuineIntel
HTT * Hyperthreading enabled
HYPERVISOR - Hypervisor is present
VMX - Supports Intel hardware-assisted virtualization
SVM - Supports AMD hardware-assisted virtualization
EM64T * Supports 64-bit mode

SMX - Supports Intel trusted execution
SKINIT - Supports AMD SKINIT

NX * Supports no-execute page protection
SMEP - Supports Supervisor Mode Execution Prevention
SMAP - Supports Supervisor Mode Access Prevention
PAGE1GB - Supports 1 GB large pages
PAE * Supports > 32-bit physical addresses
PAT * Supports Page Attribute Table
PSE * Supports 4 MB pages
PSE36 * Supports > 32-bit address 4 MB pages
PGE * Supports global bit in page tables
SS * Supports bus snooping for cache operations
VME * Supports Virtual-8086 mode
RDWRFSGSBASE - Supports direct GS/FS base access

FPU * Implements i387 floating point instructions
MMX * Supports MMX instruction set
MMXEXT - Implements AMD MMX extensions
3DNOW - Supports 3DNow! instructions
3DNOWEXT - Supports 3DNow! extension instructions
SSE * Supports Streaming SIMD Extensions
SSE2 * Supports Streaming SIMD Extensions 2
SSE3 * Supports Streaming SIMD Extensions 3
SSSE3 - Supports Supplemental SIMD Extensions 3
SSE4.1 - Supports Streaming SIMD Extensions 4.1
SSE4.2 - Supports Streaming SIMD Extensions 4.2

AES - Supports AES extensions
AVX - Supports AVX intruction extensions
FMA - Supports FMA extensions using YMM state
MSR * Implements RDMSR/WRMSR instructions
MTRR * Supports Memory Type Range Registers
XSAVE - Supports XSAVE/XRSTOR instructions
OSXSAVE - Supports XSETBV/XGETBV instructions
RDRAND - Supports RDRAND instruction
RDSEED - Supports RDSEED instruction

CMOV * Supports CMOVcc instruction
CLFSH * Supports CLFLUSH instruction
CX8 * Supports compare and exchange 8-byte instructions
CX16 * Supports CMPXCHG16B instruction
BMI1 - Supports bit manipulation extensions 1
BMI2 - Supports bit maniuplation extensions 2
ADX - Supports ADCX/ADOX instructions
DCA - Supports prefetch from memory-mapped device
F16C - Supports half-precision instruction
FXSR * Supports FXSAVE/FXSTOR instructions
FFXSR - Supports optimized FXSAVE/FSRSTOR instruction
MONITOR * Supports MONITOR and MWAIT instructions
MOVBE - Supports MOVBE instruction
ERMSB - Supports Enhanced REP MOVSB/STOSB
PCLULDQ - Supports PCLMULDQ instruction
POPCNT - Supports POPCNT instruction
SEP * Supports fast system call instructions
LAHF-SAHF - Supports LAHF/SAHF instructions in 64-bit mode
HLE - Supports Hardware Lock Elision instructions
RTM - Supports Restricted Transactional Memory instructions

DE * Supports I/O breakpoints including CR4.DE
DTES64 * Can write history of 64-bit branch addresses
DS * Implements memory-resident debug buffer
DS-CPL * Supports Debug Store feature with CPL
PCID - Supports PCIDs and settable CR4.PCIDE
INVPCID - Supports INVPCID instruction
PDCM - Supports Performance Capabilities MSR
RDTSCP - Supports RDTSCP instruction
TSC * Supports RDTSC instruction
TSC-DEADLINE - Local APIC supports one-shot deadline timer
TSC-INVARIANT - TSC runs at constant rate
xTPR * Supports disabling task priority messages

EIST - Supports Enhanced Intel Speedstep
ACPI * Implements MSR for power management
TM * Implements thermal monitor circuitry
TM2 * Implements Thermal Monitor 2 control
APIC * Implements software-accessible local APIC
x2APIC - Supports x2APIC

CNXT-ID * L1 data cache mode adaptive or BIOS

MCE * Supports Machine Check, INT18 and CR4.MCE
MCA * Implements Machine Check Architecture
PBE * Supports use of FERR#/PBE# pin

PSN - Implements 96-bit processor serial number

PREFETCHW - Supports PREFETCHW instruction

Logical to Physical Processor Map:
* Physical Processor 0

Logical Processor to Socket Map:
* Socket 0

Logical Processor to NUMA Node Map:
* NUMA Node 0

Logical Processor to Cache Map:
* Data Cache 0, Level 1, 16 KB, Assoc 8, LineSize 64
* Unified Cache 0, Level 2, 256 KB, Assoc 4, LineSize 128

Gracias por la ayuda que me puedan brindar
:)